All providers › SaskTel
Self-hosting on SaskTel: CGNAT, IPv6 & blocked ports
What public sources say about running a home server, VPN or remote access on SaskTel. We only list values we could source. Anything blank is unknown, not a "no".
SaskTel: infiNET residential
Region: SK (source)
| What | What the source says | Source |
|---|---|---|
| Notes | Official guide for port forwarding on Actiontec gateway | ISP official page Checked 2026-10-15 |
| Native IPv6 | Documented for business Dedicated Internet/IP-VPN only; not documented for residential With native IPv6, each device can get a globally routable address, which is one way to reach a home server even when IPv4 is behind CGNAT (if the remote side also has IPv6). | ISP official page Checked 2026-10-15 |
| Static IPv4 on residential plans | Static IP is a separate subscription (order by phone); in-home Wi-Fi not available with Static IP A static IP never changes. A public dynamic IP plus dynamic DNS is enough for most home servers; a static IP matters for mail servers and allow-lists. | ISP official page Checked 2026-10-15 |
| Top upload speed (Mbps) | 500 (infiNET 1 Gig: 940 down / 500 up) | ISP official page Checked 2026-10-15 |
| Symmetrical speeds? | No - infiNET upload is half of download (e.g. 300/150, 600/300) | ISP official page Checked 2026-10-15 |
| Access technology | Fibre to the home (infiNET); interNET plans where fibre not available | ISP official page Checked 2026-10-15 |
Unknown – help us verify: Network owner or reseller, Underlying network, Where it's available, Behind CGNAT by default?, Public IPv4 (may change), Public IPv4 cost (CAD), Static IPv4 cost (CAD), IPv6 prefix size, Inbound ports blocked, Outbound ports blocked, How to get port 25 opened, Bridge / passthrough mode, Use your own router?, Terms of service on servers. Submit a reading.
Check your own SaskTel connection
Policies can differ by area, plan and equipment. Use our 2-minute CGNAT check, then tell us what you found.